Marotta Home > Tech Info > Product Datasheets > Pressure Reducing Valve Manifolds (Close Window)
 

APPLICATIONS
Marotta manifolds are of single block or "building block" construction, and all valving is plug-in type. Based on the manifold chosen, the unit can accommodate some or all of the following:
 
A variety of configurations, materials, pressure ranges, flows, fittings, etc., are available to meet specific customer requirements.  Each manifold type is capable of numerous pressure settings and various flow rates.  The pressure reducers are designed to MIL-V-2961 and the pressure relief valve to MIL-V-22549. The manifolds meet shock (MIL-S-901C) and vibration (MIL-STD-167) environments. 

OPERATING DESCRIPTION
Line fluid enters the manifold through the inlet shut-off valve. Flow passes through the filter, pressure regulator, outlet shut-off valve and into the system. The manifolds are designed for easy servicing during operation. To change the filter or service the regulator, close both shut-off valves (bleed trapped pressure if necessary). An orifice may be installed at the inlet shut-off valve to limit flow through the manifold. The limit is in accordance with customer requirements.
VALVE SPECIFICATIONS
Manifold RM10 RM11 RM12 RM21 RM22
Pressure Reducing Valves 1 1 1 2 2
Relief - 1 2 1 2
Filters - - - 2 2
Associated shut-off valving - - - Yes Yes
Provisions
For inlet Yes Yes Yes Yes Yes
Filter   Yes Yes - -
For outlet - Yes Yes Yes Yes
For gage - Yes - Yes Yes
For relief discharge ports - Yes Yes Yes Yes
Note: The manifolds are designed to accommodate several features, including inlet shut-off valving, filters, pressure reducer, pressure relief valves, relief valve selector valve, outlet shut-off valving, by-pass valving, filter bleed, and inlet, outlet, and relief discharge ports.  Contact Marotta for more details.