|
APPLICATIONS
|
The
modular design concept of the MV74MM makes it
possible to design and build production systems,
brass-board arrangements or test set-ups by
using the same valves for each application. The
high efficiency of Marotta’s directional
control valve allows them to be used in a wide
range of applications such as:
|
|
|
 |
|
OPERATING
DESCRIPTION
|
|
In
the de-energized position, Port “A” is
blocked by the poppet, which is held against the
normally closed seat by the poppet return
spring. Port “B” is directly open to Port
“C”, permitting free flow in either
direction.
With voltage applied, the solenoid armature
assembly moves the poppet away from the normally
closed seat and onto the normally open seat.
Now, Port “A” and Port “C” are
interconnected and Port “B” is sealed from
Port “C”.
The valves are a balanced poppet design,
requiring a relatively small solenoid actuator.
This feature conserves power and minimizes the
space required for installation. |
|
|
| VALVE SPECIFICATIONS |
| Model Number |
MV74MM |
| Part Number |
217363-0001 |
| Pressure Range |
0-3,000
psig (0-206 bar) |
| Proof Pressure |
4,000
psig (275 bar) |
| Burst Pressure |
7,500
psig (516 bar) |
| End Connections |
MS
33656-4
¼" port, Aluminum |
| Electrical |
Continuous
Duty
18 to 28 VDC
1.0 amp at 24 VDC |
| Cv |
0.24 |
| ESEOD |
0.115
dia |
| Body Material |
Aluminum
Alloy |
| Trim |
300
Series Stainless Steel |
| Seal Material |
Buna
N |
| Seat Material |
Nylon |
| Weight |
0.8
lb (0.36 kg) |
| Note:
The listed performance data represents
specific program requirements and not
the design limitations of the device.
Valves for 10,000 psi operating pressure
also available. |
|
|
|
|
|
|
