Marotta Home > Tech Info > Product Datasheets > 2 or 3 Way Solenoid Valves 4,100 psig (Close Window)
 

APPLICATIONS

OPERATING DESCRIPTION

The MV604C series utilizes a number of common components to create 2W2P or 3W2P valves in both NC and NO configurations. The valves have CRES 440C sealing components for leakage free operation and high cycle life. Valves have been qualified to over 500,000 pressure impulse cycles.

No dynamic seals are used in the valve, making it ideal for fast response and/or low temperature applications.

Qualified versions include both connector and flying lead configurations and can include transient voltage suppression. Integral filter on the supply port can also be supplied.
VALVE SPECIFICATIONS
Model Number MV604C
Part Number MV604C-00X-9
Various dash "x" designations for:
3W2P NC or 3W2P NO
2W2P NC or 2W2P NO
Dual Coil
Flying Leads
Integral Filter
Pressure Range 0-4,100 psig (0-282 bar)
Proof Pressure 6,000 psig (413 bar)
Burst Pressure 10,000 psig (689 bar)
Electrical Continuous Duty: 
18 to 32 VDC
0.5 amp at 24 VDC
Resistance: 48 ohm
Cv 0.016
ESEOD 0.03 in (0.76 mm)
Body Material Stainless Steel
Trim Corrosion Resistant Steel
Seal Material Buna N
Seat Material 440C
Weight 0.6 lb (0.27 kg) approximately
Note: The listed performance data represents specific program requirements and not the design limitations of the device.